Product Name: Fatliquor-5.0™
SECTION 1 Product and Preparation Information
The information and opinions contained within this data sheet are supplied by the original manufacturer or supplier (s) of the specific product (s). The information and specifications are believed to be current and correct to the best of our knowledge.
This data does not represent any form of warranty or representations for which Leather Doctor® System will be held responsible. Since proper use and interpretation of this information is beyond our control, we feel it is the users’ obligation to determine the conditions for the safest and correct use of this product.
Manufacturer / Supplier:
Leather Doctor® System
3008 Maplewood Court
Coquitlam, Greater Vancouver,
BC, V3E 3P3, Canada.
Tel: 604 468 2340
[email protected]
Transport Emergency Telephone: (613) 996 6666 CANUTEC – Canada
Telephone Number for Information: (604) 468 2340
Date Prepared: June 1, 2013
Prepared By: Roger Koh
Product Use: Softening all Leathers including Suede & Nubuck.
SECTION 2 Hazardous Ingredients
This product has not been tested as a whole for health effects on animals or humans. According to the OSHA (Occupational Safety and Health Administration - U.S. Department of Labor) Hazardous Communications Standard (29 CFR 1910.1200) any hazardous ingredients that comprise > 1.0% of the material and any carcinogenic ingredients that comprise > 0.1% must be listed on the MSDS.
Hazardous Ingredients > 1.0%
None
Carcinogenic Ingredient > 0.1%
None
SECTION 3 Hazard Identification
Hazard Description: Not Applicable
Information pertaining to particular dangers for man or environment: Not Applicable
Classification System: NFPA ratings (scale 0-4)
Health = 0
Fire =1
Reactivity = 0
HMIS ratings (scale 0-4)
Health = 0
Fire = 1
Reactivity = 0
SECTION 4 First Aid Measures
General Information: No special measures required.
After inhalation: Supply fresh air; consult doctor in case of complains.
After Skin Contact: Generally this product does not irritate the skin.
After Eye Contact: Rinse open eye for several minutes under running water.
After Swallowing: If a symptom persists consult doctor.
Treatment: See above procedures.
SECTION 5 Fire Fighting Measures
Suitable Extinguishing Agents: Use fire fighting measures that suit the environment - Water, CO2, Foam.
Protective Equipment: No special measure required.
SECTION 6 Accidental Release Measures
Person-Related Safety Precaution: Not required.
Measure for Environment Protection: Do not allow product to reach sewage system or any water course.
Do not allow to enter sewers / surface or ground water.
Measures for Cleaning / Collecting: Absorb with liquid-binding material
(sand, diatomite, acid binders, universal binders, sawdust).
Additional Information: No dangerous substances are released.
After Swallowing: If symptoms persists consult doctor.
SECTION 7 Handling and Storage
Handling:
Information for Safe Handling: No special measures required.
Information about protection against explosions and fires: No special measures required.
Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Requirement about storage in one common storage facilities: Not required.
Further information about storage conditions: Keep from freezing or overheating.
SECTION 8 Exposure Controls and Personal Protection
Additional information about design of technical systems: No further data; see item 7.
Components with limit values that require monitoring at the workplace: No required.
Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Requirement about storage in one common storage facilities: Not required.
Further information about storage conditions: Keep from freezing or overheating.
Personal Protective Equipment:
General Protective and Hygienic measures: The usual precautionary measures for handling chemicals should be followed.
Breathing Equipment: Not Required.
Protection of Hands: The glove material has to be impermeable.
Eye Protection: Goggles recommended during refilling.
SECTION 9 Physical and Chemical Properties
General Information:
Form: Emulsion.
Color: Milky.
Odor: Characteristic.
Change in Condition:
pH Value @ 20*C (68*F): 5.0
Melting Point: Undetermined.
Boiling Point: > 315*C (>599*F)
Flash Point: > 315*C (>599*F)
Danger of Explosion: Product does not present an explosion hazard.
Density at 20*C (68*F): ND g/cm3
Solubility in Water: Soluble
Organic Solvents: 0%
Decomposition: No dangerous decomposition products known.
SECTION 10 Stability and Reactivity
Thermal Decomposition: No decomposition if used according to specifications.
Dangerous Reactions: No dangerous reactions known.
SECTION 11 Toxicological Information
Acute Toxicity:
Primary Irritant Effect:
On the Skin: No Irritant Effect.
On the Eye: No Irritant Effect.
Sensitization: No sensitizing Effect known.
Additional toxicological Information:
When used and handled according to specifications, the product does not have any harmful effects according to our experience and the information provided to us. This substance is not subject to classification.
SECTION 12 Ecological Information
Information about Elimination: Not Applicable
Other Information: Not Applicable
Components: Not Determined
Mobility and Bioaccumulation Potential: Not Determined
General Notes: Water hazard class 1 (Self-assessment): slightly hazardous for water. Do not al low large quantities of it to reach ground water, water course or sewage system.
SECTION 13 Disposal Considerations
Product Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Small amounts may be diluted with plenty of water and washed away. Dispose of bigger amounts in
accordance with Local Authority Requirements.
Un-cleaned Packaging Recommendation:
Disposal must be made according to official regulations.